|In stock: 2|
The Ubiquiti airFiber is housed in a compact, highly efficient form factor, enabling it to deliver revolutionary performance of up to 2Gbps aggregate throughput and up to 20+ km in range.
The airFiber AF24HD ushers in a new era in wireless and carrier-class backhaul technology.
Ubiquiti's INVICTUS custom silicon dramatically improves wireless performance. The AF-24HD model supports the dense modulation rates, up to 256QAM, that are required for high data rates, up to 2 Gbps.
The airFiber AF-24HD features the most powerful automatic compensation for path loss degradation due to rain fade, so it provides the best range among 24 GHz products and allows for constellation threshold extension.
Advanced Antenna System:- Featuring a dual-independent 2x2 MIMO 24GHz hi-gain reflector antenna system. The Ubiquiti airFiber can operate in both FDD (Frequency Division Duplex) and HDD (Hybrid Division Duplex) modes for unparalleled speed and spectral efficiency in the 24GHz worldwide license-free band. (The 24GHz License Exempt radio band in the EU is limited to 24.2GHz only, therefore dual frequency FDD mode is not permitted, however single frequency FDD mode can still be used although with reduced range).
An independent lab has tested the airFiber mechanical assembly to meet MIL-STD-810G, a rigorous United States Military Standard that defines a variety of challenging environmental conditions.
The mechanical assembly has also undergone vibration testing using an extended version of IEC 60068?2?6, an environmental standard of the IEC (International Electrotechnical Commission).
Plug and Play Deployment:- Based on Ubiquiti's innovative and intuitive airOS, the airFiber Configuration Interface enables quick configuration and deployment. With installation efficiency in mind, the mechanical design allows easy installation by one person. A two person installation crew can effectively install and align an airFiber link.
Advanced Design:- The Ubiquiti airFiber uses patent-pending technology to virtually eliminate packet transmission latency. Conventional wireless standards impose a latency by having to receive a packet before a packet is transmitted. airFiber can transmit data synchronously without any wait time.
We recommend cabling the AF24HD using Ubiquiti's TOUGHCable Carrier with its extra shielding and grounding make it perfect for deployments up towers and in busy RF zones. Click here for TOUGHCable Carrier. If you require more range for you back haul link then why not check out the AF5 which has an impressive range of 100+Km, click here to see the Ubiquiti airFiber AF5.
Operating Frequency: 24.05 - 24.25 GHz
Dimensions: 593 x 768 x 370 mm
Weight 17.3 kg (Mount Included)
Max. Power Consumption: < 50W
Power Supply: 50V, 1.2A PoE GigE Adapter (Included)
Power Method: Passive Power over Ethernet (42-58VDC)
Certifications: CE, FCC, IC
Mounting: Pole Mount Kit (Included)
Operating Temperature: -40 to 55C (-40 to 131F)
Status LEDs: Data Port Speed, Data Port Link/Activity, Configuration Port Speed, Configuration Port Link/Activity, GPS Synchronisation, Modulation Mode, Master/Slave, RF Status,
Two-Digit LED Display Calibrated in dBm
Data Port: (1) 10/100/1000 Ethernet Port
Configuration Port: (1) 10/100 Ethernet Port
Auxiliary Port: (1) RJ-12, Alignment Tone Port
Maximum Throughput: 2 Gbps
Maximum Range: 20+ km
Packets per Second: > 1 Million
Encryption: 128-Bit AES
Forward Error Correction: 164/205
Cyclic Prefix: 1/16 Fixed
Uplink/Downlink Ratio: 50% Fixed
GPS: GPS Clock Synchronisation
EIRP: ~33 dBm (Can be reduced to 20dBm to comply with UK/EU regulations)
Frequency Accuracy: +/-2.5 ppm without GPS Synchronisation, +/- 0.2 ppm with GPS Synchronisation
Channel Bandwidth: 100 MHz
Operating Channels: 24.1 GHz, 24.2 GHz
Modulation: 256QAM MIMI, 64QAM MIMO, 16QAM MIMO, QPSK MIMO, QPSK SISO
Antenna Gain: 33 dBi
Beamwidth: < 3.5 Degs
Front-to-Back Ratio: 70 dB
Polarity: Dual-Slant Polarisation
Cross-Polarity Isolation: > 28 dB