DrayTek Vigor 2862Vac - 2 x USB ports for 3G/4G

The Vigor 2862Vac features the same specification as the standard Vigor 2862 series router models, with the addition of two phone ports for VoIP services.

Standard Analogue telephone handsets or DECT phone handsets can be connected to the Phone 1/2 ports and each of the phones can then be used to make and receive calls using VoIP services (over the Internet) as opposed to using your traditional landline. The two phone ports are independent so you can make two calls at once.

VoIP calls are typically much lower cost that fixed-line calls, or if you're calling another VoIP user (who is also using the same VoIP provider, or SIP compatible) the calls are free. There are many SIP VoIP providers who can provide pay-as-you-go or monthly calling plans, such as DrayTEL. You can also have your VoIP accounts registered in more than one location so that the phone rings at home or work.

An analogue phone line (your landline) can be connected so that the connected phones can also make use of your landline in addition to VoIP calls. In the event of a power cut (when your broadband and router may be offline), the phones will fall back to the land line.

A 5-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Port 5 is switchable with 'WAN2' to use it as an Ethernet WAN port instead of a LAN port.

The Vigor 2862Vac has ADSL/VDSL support through the DSL(WAN1) port; alternative WAN ports can instead provide connectivity to Ethernet feeds (Gigabit WAN2 is switchable with LAN Port 5*), secondary xDSL modems or 3G/4G modems (WAN3/4) using a supported USB 3G/4G Modem. These multiple LAN feeds can be combined for failover or load-balancing.

Vigor 2862Vac - Technical Specification

Physical Interfaces:
LAN Ports (Switch):
5 X Gigabit Ethernet (1000Mb/s) Ports
LAN Port 5 Switchable with WAN2 (req. f/w 3.8.8 or later)
WAN Ports:
WAN1 (DSL Port): ADSL/VDSL, RJ11
WAN2 :
Gigabit Ethernet (1000Mb/s) RJ45 for load balance and WAN failover
Switchable with LAN Port 5 (WAN2 disabled, req. f/w 3.8.8 or later)
Switchable with Wireless WAN - Wireless interface can provide WAN connectivity
WAN3 : 3G/4G Modem via USB Port 1 with a supported USB 3G/4G Modem (not supplied)
WAN4 : 3G/4G Modem via USB Port 2 with a supported USB 3G/4G Modem (not supplied)
USB Ports:
2 X USB 2.0 Port for 3G/4G Modem (WAN3 / WAN4), Thermometer, Printer or USB Storage
VoIP Ports:
Phone 1/2 : 2 X BT Telephone Ports (with supplied adapter), RJ11
Line : Analogue Telephone Line Port, RJ11
VoIP Features:
Protocols: SIP, RTP / RTCP
12 SIP Registrar Accounts (for up to 12 VoIP providers)
Line port for PSTN Passthrough (integrates POTS line)
Auto-fallback to PSTN under power/Internet failure
G.168 Line Echo-cancellation
Automatic Gain Control
Jitter Buffer ( 125ms )
Voice Codecs:
G.711 A / µ Law
G.723.1
G.726
G.729 A / B
VAD / CNG
Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
FAX / Modem Support G.711 Pass-through
T.38 for FAX
Supplemental Services:
Caller ID
Call Hold / Retrieve
Call Waiting
Call Waiting with Caller ID
Call Transfer
Call Forwarding ( Always , On Busy and On No Answer )
DND (Do not Disturb)
Call Barring ( Incoming / Outgoing )
MWI ( Message Waiting Indicator ) ( RFC-3842 )
Hotline (Dial preset number when handset lifted)
Performance:
Firewall: Up to 400Mb/s max
IPSec VPN: Up to 60Mb/s max
ADSL Compatibility:
ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt (ADSL)
ITU-T G.992.2 G.lite
ITU-T G.992.3 ADSL2
ITU-T G.992.5 ADSL2+
Annex L (READSL)
Annex A
Annex M
ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
DSL Forum : TR-048/67 & TR-100
VDSL Compatibility:
BT Infinity Option 1 & Option 2 Compatible
BT SIN 498 MCT Approved
Support for G.INP & Vectoring
ITU-T VDSL2 G.993.2
ITU-T G.993.1, G.997.1
Band Plan: G.998, G.997
Annex A, Annex B, Annex C
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
OLR, UPBO, DPBO Supported
US0 Supported
Loop Diagnostic Mode
DSL Forum WT-114
Load Balance/Failover Features:
Outbound Policy-Based Load-Balance to direct traffic via:
NAT or Routing
WAN Interface
LAN Interface
Specific LAN Gateway
VPN Tunnel
IP-Based or Session-Based Load Balance modes NEW!
WAN Connection Fail-over
BoD (Bandwidth on Demand)
WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
Configurable Load-Balance pool, specify WAN interfaces to load balance
WAN Budget
Vigor 2862 ATM Protocols (DSL):
RFC-2684/RFC-1483 Multiple Protocol over AAL5
RFC-2516 PPP over Ethernet
RFC-2364 PPP over AAL5
PPPoE pass through LAN/WLAN
PPPoE/PPPoA Relay
Transparent bridge for MPoA
Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
Support for RFC4638 for MTU up to 1500
Wireless LAN Features:
802.11g/b/n and 802.11ac (Vigor 2862ac only)
Backward Compatibility for 802.11b/g
Wireless Features on Vigor 2862ac:
802.11a
802.11ac (5Ghz)
4x4 MU-Mimo (5Ghz)
Up to 4 Spacial Streams
TX Beam Forming
1733Mb/s Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
Dual-band (2.4/5Ghz) simultaneous wireless
256QAM
Extended DFS frequency range
Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
Packet Aggregation and Channel Bonding
Optional Higher Gain or directional aerials available - Click Here.
Active Client list in Web Interface
Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
64/128-bit WEP Encryption
WPA/WPA2 Encryption
Switchable Hidden SSID
Restricted access list for clients (by MAC address)
Time Scheduling (WLAN radio can be disabled at certain times of day)
Time Scheduling for individual SSIDs NEW!
Access Point Discovery
WDS (Wireless Distribution system) for WLAN Bridging and Repeating
802.1x Radius Authentication
Wireless VLAN
Wireless Rate-Control
Automatic Power Management
802.11e WMM (Wi-Fi Multimedia)
Station Control, limit wireless client access time per day
Airtime Fairness NEW!
Band Steering NEW!
Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!
WAN Protocols (Ethernet):
DHCP Client
Static IP
PPPoE
PPTP
BPA
Firewall & Security Features:
CSM (Content Security Management):
URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
Prevent accessing of web sites by using their direct IP address (thus URLs only)
Blocking automatic download of Java applets and ActiveX controls
Blocking of web site cookies
Block http downloads of file types :
Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
Time Schedules for enabling/disabling the restrictions
Block popular P2P (Peer-to-Peer) file sharing programs
Block Instant Messaging programs (e.g. IRC, Skype/Yahoo Messenger etc.)
DNS Filter: Use DNS to enforce categorisation
Web Portal
Multi-NAT (32 WAN IPs per WAN1 & WAN2)
DMZ Host
DMZ Port (via LAN port P1, switchable)
40 Port Redirection rules
40 Open Port rules (10 port ranges per rule)
Policy-Based Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
DoS / DDoS Protection
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address
User Management:
Up to 200 Profiles
Supports external authentication via LDAP or RADIUS
Per User Bandwidth and Time Quota
Schedule Control to delete or disable account automatically
Bandwidth Management:
Quality of Service (QoS- For devices in the NAT subnet according to source or destination IP)
Guaranteed Bandwidth for VoIP
Class-based Bandwidth Guarantee by User-Defined Traffic Categories
Layer 2&3 (802.1p & TOS/DCSP)
DiffServ Code Point Classifying
4-level Priority for each Direction (Inbound / Outbound)
Bandwidth Borrowed
App QoS: Classify traffic by Application
Temporary (5 minute) Quick Blocking of any LAN Client
Bandwidth Limit (Shared or individual limit)
Smart Bandwidth Limitation (Triggered by Traffic / Session)
Session Limit
Network/Router Management:
Web-Based User Interface (HTTP / HTTPS)
CLI ( Command Line Interface ) / Telnet / SSH
Web Console: Access CLI through Web Interface
Administration Access Control
Brute Force Protection
Configuration Backup / Restore
Configuration Import from Vigor 2820, Vigor 2830, Vigor 2850 & Vigor 2860
Built-in Diagnostic Function
Firmware Upgrade via Web Interface, TFTP, FTP
Logging via Syslog
Supports SmartMonitor (up to 50 IPs monitored)
SNMP v2 & v3 Management with MIB-II
TR-069
TR-104
Access Point Management: Centrally Manage up to 20 DrayTek VigorAPs
Switch Management: Centrally Manage up to 10 DrayTek VigorSwitches
VPN Facilities:
Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
Tunnelling Protocols:
PPTP
IPSec
L2TP
L2TP over IPSec
DrayTek SSL
GRE NEW!
IPSec Main and Agressive modes
IKE Phase 1 DiffieHelman Groups 1,2,5 & 14
IKE Phase 2 DiffieHelman Groups 1,2,5 & 14 (will match phase 1 selection)
IPsec IKEv1 & IKEv2 NEW!
Encryption : MPPE, DES / 3DES (168bits) and Hardware-Based AES (128/192/256bits)
Authentication : Hardware-Based MD5, SHA-1 and SHA-256 (f/w 3.8.3 and later)
IKE Authentication : Pre-shared Key or X.509 Digital Signature
SSL VPN for teleworkers - Up to 16 simultaneous users. Proxy or tunnel
LAN-to-LAN & Teleworker-to-LAN connectivity
DHCP over IPSec
NAT-Traversal ( NAT-T )
Dead Peer Detection (DPD)
VPN Pass-Through
MOTP (Mobile One Time Password) for two factor authentication (2FA)
Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN NEW!
Network Features:
Port-Based VLAN (Inclusive/Exclusive Groups)
802.1q VLAN Tagging
Port Mirroring
802.1X Port Authentication
Multi Subnet DHCP Servers with DHCP Relay
LAN Clients : Up to 1022 per subnet (for subnets 1-3)
Custom DHCP Option support
Dynamic DNS
DNSSEC support NEW!
DNS Transparent Proxy
DNS Caching
LAN DNS (supports CNAME)
NTP Client (Synchronise Router Time)
Call Scheduling (Enable/Trigger Internet Access by Time)
RADIUS Client
LDAP Client
TACACS+ Client
High Availability
Internal RADIUS Server
Microsoft™ UPnP Support
Maximum MTU 1534
Routing Protocols:
Static Routing (30 routes)
RIP V2
RIPng for IPv6 NEW!
Operating Requirements:
Rack Mountable (Optional Vigor RM1 mounting bracket required)
Wall Mountable
Temperature Operating : 0°C ~ 45°C
Storage : -25°C ~ 70°C
Humidity 10% ~ 90% (non-condensing)
Power Consumption: 31 Watt Max.
Dimensions: L240.96 * W165.07 * H43.96 ( mm )
Operating Power: DC 12V (via external PSU, supplied)
Warranty : Two (2) Years RTB
Power Requirements : 220-240VAC