Vigor AP-900 Access Point

Vigor AP-900 Specification
Physical Interfaces/Controls:
LAN A : 4 x Gigabit Ethernet
Port 1 accepts PoE Power
LAN B : 1 x Gigabit Ethernet
USB 2.0 Interface (for printer or thermometer)
Power On/Off Button
Wireless On / Off / WDS Button
WDS Operation/button can be disabled
Factory Reset Button (recessed)
DC Power Socket
Two antennae (aerial) connectors - RSMA-Female type
Two Antennae (Removable, 2dB, both TX/RX dual-band)
Wireless LAN Compatibility:
IEEE 802.11a / b / g / n
Frequency Band 2.4 GHz & 5.8Ghz - Simultaneous Operation
Extended 5Ghz Band - Channels 36-140
DFS/TPC Support
300Mb/s Total wireless bandwidth per band
Security Features:
Wireless Encryption : WPA2 (802.11i) Encryption
Also supports WPA/WEP (Not recommended)
User Authentication : 802.1x (using built-in or external Radius Server) (MD5/PEAP Modes)
Wireless Client Isolation
Hidden SSIDs (Selectable)
WPS - WiFi Protected Setup
MAC Address Filtering (ACL)
Operational Modes (2.4Ghz band)
802.11b, 802.11g, 802.11n
Access Point
AP Bridge Point-to-Point
AP Bridge Point-to-Multipoint
AP Bridge WDS
Universal Repeater
Operational Modes (5.8Ghz band)
802.11a / 802.11n
Channels 36-140 with DFS/TPC
Access Point
Universal Repeater
Wireless Control Features:
Wireless Client Status List in WUI
Up to four distinct SSIDs (for VLANs) for each frequency band (2.4/5Ghz)
WMM (Wireless MultiMedia)
MAC Cloning
Built-in DHCP server & client
802.1q VLAN
VLAN Grouping & mapping for LAN A & LAN B
Management:
Web Interface (HTTP/HTTPS*)
TR-069 Control (For Vigor-ACS-SI or other TR-069 platform)
CLI (Command Line Interface) - Telnet
Firmware upgrade by TR-069/HTTP
SNMP V2 / 2c / 3*
Central AP Management (from compatible DrayTek router/controller)
Management VLAN for LAN A & LAN B
Power, environmental & Physical:
Temperature Operation : 0° C to 40° C
Humidity Requirements: 10% to 90 % (Non-condensing)
Physical Dimensions: 107 x 167 x 45 ( W x H x D ) mm
Weight : 0.305kg (main unit, including Aerials)
Wall Mountable
Pack Contents : AP-900 main unit, two aerials, PSU (220-240VAC), quick start guide, manual on CD-Rom
Power : 12VDC via AC/DC PSU (supplied) or 802.3af PoE