Sin productos
Manufacturer: Ubiquiti
Code: LOCOM2
In stock: 0 |
Web-based configuration is very simple and clear. Settings include:
AP mode, client or WDS
Traffic shaping
QoS
Between WAN and LAN routing and transparent bridge with or without NAT
Signal strength, which is reported by the onboard LED indicator
Output power up to 23 dBm
In bridge mode and WDS device supports transparent transmission IPv6.
Included is a 24 V PoE power source, which includes a reset button putting device into firmware recovery TFTP mode. In additional unit supports PoE at second UTP port for direct power supply of second device. This feature can be software disabled.
Specifications:
TX Power regulation: yes
Comformity: FCC, CE
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt
DHCP: yes
Dimension: 163 x 31 x 80 mm
Encryption: WEP, WPA, WPA2
Frequence: 2400 - 2486 MHz
Gain: 8 dBi
Chipset: Atheros
Interface : LAN, WiFI
LAN port: 1x RJ45 10/100 Mbps
Max. output power: 23 dBm
Modulation: OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM
NAND: 8 MB
Operation mode : AP, Client, WDS
Operational temperature: -30~80C
OS: AirOS V
Polarization: Horizontal and Vertical
Power supply: 24 V, 0,5 A
Procesor: MIPS 24KC, 400 MHz
RAM: 32 MB
Sensitivity: -96 dBm
Standards: 802.11b/g/n
SWR: < 1,4
Transmission speed: 300 Mbps
Weight: 0,18 kg